helvetica

sans-serif>6.Very easy to make pairing for transmitter and receiver;

7. Multi collar receivers are supported by one transmitter;

III.  Package Including:

KD661C-1:

Wireless Transmitter *1

Collar Receiver       *1

Adjustable TPU Strap *1

5V/1A Charger         *1

Metal Contact Probes *4

LED Test Light        *1

English Manual      *1

Flag            *20

KD661C-2:

Wireless Transmitter *1

Collar Receiver       *2

Adjustable TPU Strap *2

5V/1A Charger         *1

Metal Contact Probes *8

LED Test Light        *1

English Manual      *1

Flag            *20

III. Transmitter operation

  1.  Power ON or OFF the transmitter     Press ON/OFF button and hold for 3 seconds to power on the   transmitter. The LED power indicator willlight up to be blue and a value of signal level displays on the screen. To power off the transmitter you can also press ON/OFF button and hold for 3 seconds.

2. Set up the remote control range     The remote control range is a straight distance between transmitter and receiver collar which depends on the intensity of transmitted signal. The value of transmitted signal is more the remote control range is farther. For this wireless fence KD661C the max. remote control range is up t0 500 meters.

     Press + or - button on the transmitter you can increase or decrease the signal level from O t0 100 levels. the value you setting will display on the screen.

Notice:

   The remote control distance is measured in pen area it will be affected by electromagnetic waves or obstacle around the fence system and the distance will be reduced slightly.

3. Switch the transmitter in pairing status

      When the transmitter is on press ON/OFF button and shortly switch it in pairing status. The screen will display 1dP with flashing. You should finish the pairing within 10 seconds otherwise the display will disappear and return back to working status (it will display signal value ) .

4. Charge for the transmitter

     The transmitter is rechargeable. When the LED power indicator changes to be red and flashing it means transmitter is low battery. Please charge for it. Once it is fully charged the LED will turn to be blue.

     Notice: Please charge it at least 4 hours at first time.

IV.Receiver collar operation

  1.  Assemble the parts into receiver collar

      Assemble 2 contact probes to receiver's  screws. (There two type probes in the package the short ones suit for small size dogs and long  probes for medium and large size dogs. ) and  then make TPU strap go through receiver back  and both holes.

2.  Power ON/OFF the receiver

    Press ON/OFF button and hold for 3 seconds to turn on the receiver collar. A short  Bi sound will be heard and red LED lights on. If the transmitter is off or out of control the Bi sound will issue every seconds unit you turn off the receiver or make sure the transmitter is on and within remote control range which displays on the transmitter screen now.

3.  Make receiver pairing with transmitter

   To make a receiver pairing with transmitter firstly you should ensure the transmitter is in pairing status and receiver is on and then press ON/OFF button shortly. Once the power LED of receiver is changed toblue with a short sound Bi it means the pairing is successful.

     Notice: If the transmitter is off the receiver would not enter into paring status.

   4.   Charge for the receiver collar

        The receiver collar is rechargeable. When the LED power indicator red   and flashing it means the receiver is low battery. Please charge for it. The   charger is common with that of transmitter. Once it is fully charged the   LED will change to blue.

        Notice: Please charge it at least 4 hours at first time.

V.   Connect a receiver to transmitter

       If you want to connect any of KD661C receiver with a KD661C  transmitter and set up the fence system. You should make them   pairing at first. Please follow the pairing steps as below:

Step l: switch the transmitter in pairing status

     Check the transmitter is on. And then press the ON/OFF button shortly.             The screen will display ldP with flashing it means the tra nsmitter is in       pairing status now.

Step 2: make a receiver pairing with the transmitter

   Take a receiver near the pairing transmitter press the ON/OFF       button of receiver shortly. The power LED is changed to blue and a       short sound Bi is issued it means the pairing is successful.

Notice: you should finish the pairing within 10 seconds otherwise the display of transmitter will disappear and return back to working       status (it will display signal value ) .

Step 3: verify the wireless fence system

Setting a proper signal levels on transmitter panel to get the remote   control range you want (please refer to step 2 0f IV set up remote control range) .

   Take away the receiver from the transmitter unit Bi-Bi sounds is   issued from it and attach the LED test light on contact probes of receiver the LED will light on. That means the receiver is beyond the  boundary you set just now and all the function are OK.

          Otherwise the receiver is not connect to the transmitter you should       connect it again as above steps.

       Notice: all the receivers have been paired to the transmitter and  verified the connection before packing.

VI.  Start training your dogs

   1.    Put the receiver collar on the neck of your dog and check the  tightness is proper.

  2.   Check or Set the transmitting signal level by pressing +/- button on the transmitter. The value you setting will display on the screen.      

Notice: The remote control range is measured in open area it will be       affectted by electromagnetic waves or obstacle around the fence system and the distance will be reduced slightly.

  3. Place the transmitter is more than l.5 meters from ground and there is no  any metal wall around it. So as to obtain the best remote control range.

VIII.  Working principle of the fence system

       The system will start up automatically while your dog is running  beyond the setting control range and going ahead the receiver will start  up working as this sequence unit your dog comes back to safe area.

     1.  Issue Bi-Bi warning sounds with red LED is flashing every 2 seconds;

     2.   Start static shock in low level after the third warning sound and increase the intensity of static shock from level l to level 4 every seconds

     3.  Stop working for 30 Seconds and then start another sequence.

       If your dog doesn't come back to the safe area always the receiver   will give up working after the third cycle. It will automatically shut down  to prevent your dog from excessive punishment.

        Notice: Please check the transmitter is sufficient battery capacity while the system is in working status. If the transmitter is powered off  somehow the receiver will keep working with warning sounds and static shock for 3 work cycles which the situation is similar to dog  always keep moving beyond the boundary.

IX. ImportantNotes:

   1. The wireless fence system is intended to use for dogs only.

   2.  A low battery may cause intermittent operation. Do not use it and charge    it immediately for a low battery.

   3.  DO NOT leave the collar on your dog for more than 10 hours per day.

  4. Keep the receiver collar away from children.

   5.  Read all instructions before using this product.

<